 |
Underlayment:
Aussie Roofing offers two kinds of
underlayment systems:
- STANDARD: which is #15 or #30
pound felt.
- PREFERRED: which is the GAF
Weather Stopper® underlayment system.
NOTE: When Aussie Roofing installs
plywood, we use a 10 penny nail (3 inch) on 9 inch centers.
 Aussie Roofing's PREFERRED underlayment materials is the GAF Weather
Stopper® for preparing your new roof with premium quality protection. This
is quality you can trust from GAF—North America's largest roofing
manufacturer.
 The Weather Stopper® materials have earned the prestigious Good
Housekeeping Seal, which means that Good Housekeeping stands behind the
products in this system.
 GAF provides are 50-year
non-prorated warranty when a 50-year Weather Stopper® roofing system is
installed by Aussie Roofing—a GAF authorized installer.
GAF provides a 10-year
non-prorated warranty when a 30 or 40-year Weather Stopper® roofing system
is installed by Aussie Roofing—a GAF authorized installer.
 |
|
|
|
Quality Low Slope
Roofing Membrane |
|
|
|
|
|
|
|
|
|
|
|
|
Liberty™ self-adhering roofing systems are the quicker,
easier, |
|
|
 |
|
|
|
|
and safer
solution for porches, carports, garages, and other low slope roofing
project—no open torches or hot asphalt needed! |
|
 |
 |
 |
 |
Insulation:
  RMAX POLYISO
ROOFING
INSULATION PRODUCTS
Rmax offers the most comprehensive
line of high-quality polyiso roofing insulation products, meeting virtually any
application in the commercial, industrial or residential construction business.
For the finest products—certified to perform, delivered on time and backed
by the most knowledgeable people in the industry—go straight to the top.
Specify Rmax.
 For more than 25 years, Rmax has led the roofing
industry with breakthrough thinking in energy efficient insulation products.
And today, the legacy continues with PIMA Quality Mark assurance.
Quality Mark is a voluntary testing
program established by the Polyiso Insulation Manufacturers Association (PIMA)
as a means of independently certifying the Long-Term Thermal Resistance (LTTR)
values of polyiso insulation. LTTR is a scientifically supported method of
calculating the 15-year time-weighted average R-value of roofing insulation.
(R-value is heat resistance.)
Doing One Thing Well In So Many
Different Ways...
 Multi-Max® FA-3
A versatile solution and
the most popular choice for new and retrofit applications, Multi-Max FA-3 works
great with single ply, built-up and modified bitumen membranes, as well
as with metal panel roofing systems. |
Nailable Base-3
Save time and money installing
the Rmax all-in-one roof insulation and nailing surface, ideal for new and
retrofit construction where roofing tiles, slate or metal
panel roofing systems are used.
The Nailable Base-3 family of
insulation products includes the original, all-in-one roof insulation and
nailing surface products, plus... |
 Vented Nailable Base-3
For reduced heat build-up
under shingled roofs, this all-in-one roofing insulation and nailing
surface product also provides air-flow channels that help prolong the life of
shingles installed in residential and commercial roofing
applications.
|
 Multi-Vent Nailable
Base
Part of our Nailable Base
family of products, where increased air-flow is specified, Multi-Vent Nailable
Base features a 12" block pattern for improved OSB support, yet it facilitates
more than 90% free air-flow under the OSB and shingles to prevent heat
build-up.
|
 Advantage
Vented Nailable Base-3
Ideal for layered roofing
applications. When the job calls for improved air-flow in complex
installations, Advantage Vented Nailable Base-3 answers the call. The OSB
nailing surface over insulation allows staggering of joints between layers for
easier handling and installation.
|
 RDECK®-3
Cut installation time by
eliminating the need for an additional cover board, with Rmax RDECK-3,
specially designed as a suitable substrate for virtually any roofing
membrane on the market.
|
 Re-Cover
Board-3
Ideal for built-up,
modified bitumen or single-ply membranes, Rmax Re-Cover Board-3
provides improved energy efficiency in an easy-to-install re-roofing insulation
product. Great for easy retrofit and re-roofing applications.
|
Thermaroof® Composite-3
Specially manufactured for
hot asphalt or torch-applied systems, this labor saving, energy
efficient insulation with 1/2" perlite is compatible with built-up,
modified bitumen and single-ply membranes in new or retrofit
applications. |
Thermaroof® Plus-3
This heavy-duty, foil-faced
roof insulation provides maximum efficiency. It is ideally suited for
mechanically attached and ballasted single-ply membranes or
standing-seam metal roof systems. |
 Tapered
Thermaroof®-3
For energy efficiency and
improved roof drainage use Rmax Tapered Thermaroof-3 on flat roofs.
Tapered Thermaroof-3 helps where drainage is a problem. Tapered Thermaroof-3
installs easily with single-ply, built-up or modified bitumen
membranes in new and retrofit applications. |
RMAX'S VERSATILE LINE OF ROOFING
INSULATION PRODUCTS PROVIDES SOLUTIONS FOR A WIDE RANGE OF BUILDING
SYSTEMS:
| ROOFING
SYSTEMS: |
Built-Up
Roofing |
Modified
Bitumen |
Single-Ply
Ballasted |
Mechanically
Attached |
Fully
Adhered |
Standing Seam
Metal |
Shingles |
Tile, Slate,
Shake |
| Multi-Max FA-3 |
 |
|
|
|
|
|
|
|
| Tapered Thermaroof-3 |
|
|
|
|
|
|
|
|
| Re-Cover Board-3 |
|
|
|
|
|
|
|
|
| Multi-Max-3 |
|
|
|
|
|
|
|
|
| Thermaroof Plus-3 |
|
|
|
|
|
|
|
|
| Thermaroof Composite-3 |
|
|
|
|
|
|
|
|
| RDECK-3 |
|
|
|
|
|
|
|
|
| Nailable Base-3 |
|
|
|
|
|
|
|
|
| Vented Nailable Base-3 |
|
|
|
|
|
|
|
|
| Multi-Vent Nailable Base |
|
|
|
|
|
|
|
|
| Advantage Nailable Base-3 |
|
|
|
|
|
|
|
|
Flashing:
|
